US: SAE Traveler Info - WAVE WSMP
Description:
This solution is used within the U.S.. It combines standards associated with US: SAE Traveler Info with those for V-X: WAVE WSMP. The US: SAE Traveler Info standards include upper-layer standards required to implement V2X traveler information flows. The V-X: WAVE WSMP standards include lower-layer standards that support connectionless, near constant, ultra-low latency vehicle-to-any communications within ~300m using the WAVE Short Messaging Protocol (WSMP) over IEEE WAVE in the 5.9GHz spectrum. The broadcast mode is interoperable with M5 FNTP.
Comm Profile: V-X: WAVE WSMP
Standards in Profile:
Level | Doc # | Standard | Description |
Access
|
|
Bundle: WAVE - Subnet
|
A bundle of standards specifying the lower layers of the reference communications model for the US DSRC environment.
|
Security
|
|
Bundle: IEEE 1609.2
|
A bundle of standards that groups a set of IEEE security standards together for easy reference.
|
TransNet
|
IEEE 1609.3
|
IEEE 1609.3 WAVE - Networking Services
|
This standard defines the network and transport layer options for the WAVE environment. The standard defines three options: a bandwidth efficient single-hop solution known as WSMP, UDP/IP, and TCP/IP. It has been harmonized with ISO FNTP and FSAP - a common message format specified in ISO 16460.
|
Data Profile: US: SAE Traveler Info
Standards in Profile:
Level | Doc # | Standard | Description |
Facilities
|
SAE J2945
|
SAE J2945/0 DSRC Common Design Elements
|
This standard defines cross-cutting material which applies to the J2945/x series including generic DSRC interface requirements and guidance on Systems Engineering (SE) content.
|
ITS Application Entity
|
SAE J2735
|
SAE J2735 DSRC Message Set
|
This standard defines the data and messages for use in DSRC (i.e., V2V, V2I, and V2D) applications. The SAE J2945 series defines additional requirements on how to use these messages.
|
ITS Application Entity
|
SAE J2945/4
|
SAE J2945/4 Road Safety Applications
|
This document revises and extends the existing SAE J2735 message elements in order to include additional travel and roadway information from the infrastructure to enhance safety awareness and promote the exchange and transfer of such messages types between vehicles and the infrastructure (V2I).
|
Readiness Description:
One serious or several significant issues. This category often includes proprietary or partial solutions. The communications solution may fail to provide even a base level of interoperability and security. Consider alternative solutions, or define specific revisions or upgrades that would provide a level of interoperability or security that are needed for the deployment.
Last Updated 4/16/2024