US: WAVE Tolling - WAVE TCP
Description:
This solution is used within the U.S.. It combines standards associated with US: WAVE Tolling with those for V-X: WAVE TCP. The US: WAVE Tolling standards include upper-layer standards required to implement V2I tolling flows. The V-X: WAVE TCP standards include lower-layer standards that support connection-oriented vehicle-to-any communications within ~300m using the Transmission Control Protocol (TCP) over Internet Protocol version 6 (IPv6) over IEEE WAVE in the 5.9GHz spectrum.
Comm Profile: V-X: WAVE TCP
Standards in Profile:
Level | Doc # | Standard | Description |
Access
|
|
Bundle: WAVE - Subnet
|
A bundle of standards specifying the lower layers of the reference communications model for the US DSRC environment.
|
Security
|
|
Bundle: IEEE 1609.2
|
A bundle of standards that groups a set of IEEE security standards together for easy reference.
|
TransNet
|
|
Bundle: IPv6 for WAVE
|
A bundle of standards that identifies the RFCs that define how to use IPv6 over a WAVE (DSRC) environment. This group of standards is identified as a part of IEEE 1609.3.
|
TransNet
|
IEEE 1609.3
|
IEEE 1609.3 WAVE - Networking Services
|
This standard defines the network and transport layer options for the WAVE environment. The standard defines three options: a bandwidth efficient single-hop solution known as WSMP, UDP/IP, and TCP/IP. It has been harmonized with ISO FNTP and FSAP - a common message format specified in ISO 16460.
|
TransNet
|
IETF RFC 9293
|
IETF RFC 9293 TCP
|
This document specifies the Transmission Control Protocol (TCP). TCP is an important transport-layer protocol in the Internet protocol stack, and it has continuously evolved over decades of use and growth of the Internet. Over this time, a number of changes have been made to TCP as it was specified in RFC 793, though these have only been documented in a piecemeal fashion. This document collects and brings those changes together with the protocol specification from RFC 793. This document obsoletes RFC 793, as well as RFCs 879, 2873, 6093, 6429, 6528, and 6691 that updated parts of RFC 793. It updates RFCs 1011 and 1122, and it should be considered as a replacement for the portions of those documents dealing with TCP requirements. It also updates RFC 5961 by adding a small clarification in reset handling while in the SYN-RECEIVED state. The TCP header control bits from RFC 793 have also been updated based on RFC 3168.
|
Data Profile: US: WAVE Tolling
Standards in Profile:
Level | Doc # | Standard | Description |
Facilities
|
IEEE 1609.11
|
IEEE 1609.11 WAVE - Elec Payment
|
This standard defines a basic level of technical interoperability for an over-the-air electronic payment (e.g., tolling) protocol for the vehicle-to-roadside link for electronic payment equipment. It does not provide a full solution for interoperability, and it does not define other parts of the electronic payment system, other services, other technologies and non-technical elements of payment interoperability.
|
Facilities
|
ISO 15628
|
ISO 15628 DSRC Application Layer
|
ISO 15628 specifies the upper layers originally developed for EU 5.8 GHz backscatter communications, and US DSRC. Likely not very relevant for C-ITS. Application identifier is continued now as part of EN ISO 17419 ITS-AID.
|
ITS Application Entity
|
ISO 14906
|
ISO 14906 EFC - DSRC
|
ISO 14906 specifies the application interface in the context of electronic fee collection (EFC) systems using the dedicated short-range communication (DSRC).
|
Readiness Description:
One serious or several significant issues. This category often includes proprietary or partial solutions. The communications solution may fail to provide even a base level of interoperability and security. Consider alternative solutions, or define specific revisions or upgrades that would provide a level of interoperability or security that are needed for the deployment.
Last Updated 4/16/2024