Broward County Transit Signal Priority and Queue Jumpers
Project Description: This project will add Transit Signal Priority and Queue Jumping Capability for Broward County Transit Vehicles.
Project Status: Planned
Project Stakeholders:
Interconnect and Flow
Diagrams
Project Service Packages:
Project Information Flows:
Project Functional Requirements (Element - Functional Object):
-
BCT Fixed Route Vehicles - Transit Vehicle Signal Priority
-
1: The transit vehicle shall determine the schedule deviation and estimated times of arrival (ETA) at transit stops.
-
2: The transit vehicle shall send priority requests to traffic signal controllers at intersections, pedestrian crossings, and multimodal crossings on the roads (surface streets) and freeway (ramp controls) network that enable a transit vehicle schedule deviation to be corrected.
-
BCT Transit Systems - Transit Center Priority Management
-
1: The center shall analyze transit vehicle schedule performance to determine the need for priority along certain routes or at certain intersections.
-
Broward County Field Equipment - Roadway Signal Control
-
1: The field element shall control traffic signals under center control.
-
10: The field element shall receive request for transit vehicle signal priority.
-
4: The field element shall report the current signal control information to the center.
-
7: The field element shall return traffic signal controller fault data to the center.
-
8: The field element shall report current transit priority status to the center.
-
Broward County TMC - TMC Multi-Modal Coordination
-
1: The center shall respond to requests from transit management centers for signal priority at one or more intersections along a particular transit route.
-
Broward County TMC - TMC Signal Control
-
1: The center shall remotely control traffic signal controllers.
-
10: The center shall adjust signal timing in respond to a signal prioritization, signal preemption, pedestrian call, multi-modal crossing activation, or other requests for right-of-way.
-
3: The center shall collect traffic signal controller operational status and compare against the control information sent by the center.
-
4: The center shall collect traffic signal controller fault data from the field.
Standards:
Project Operational Concepts:
Last Updated 4/16/2024