US: SAE J3067 (J2735 SE) - WAVE IPv6
Description:
This solution is used within the U.S.. It combines standards associated with US: SAE J3067 (J2735 SE) with those for V-X: WAVE IPv6. The US: SAE J3067 (J2735 SE) standards include a proposed solution for the upper-layers to implement V2X information flows that do not yet have fully standardized messages, functionality or performance characteristics. The V-X: WAVE IPv6 standards include lower-layer standards that support connectionless vehicle-to-any communications within ~300m using the Internet Protocol version 6 (IPv6) over IEEE WAVE in the 5.9GHz spectrum.
Comm Profile: V-X: WAVE IPv6
Standards in Profile:
Level | Doc # | Standard | Description |
Access
|
|
Bundle: WAVE - Subnet
|
A bundle of standards specifying the lower layers of the reference communications model for the US DSRC environment.
|
Security
|
|
Bundle: IEEE 1609.2
|
A bundle of standards that groups a set of IEEE security standards together for easy reference.
|
TransNet
|
|
Bundle: IPv6 for WAVE
|
A bundle of standards that identifies the RFCs that define how to use IPv6 over a WAVE (DSRC) environment. This group of standards is identified as a part of IEEE 1609.3.
|
TransNet
|
IEEE 1609.3
|
IEEE 1609.3 WAVE - Networking Services
|
This standard defines the network and transport layer options for the WAVE environment. The standard defines three options: a bandwidth efficient single-hop solution known as WSMP, UDP/IP, and TCP/IP. It has been harmonized with ISO FNTP and FSAP - a common message format specified in ISO 16460.
|
TransNet
|
|
Internet Transport Alternatives
|
A set of alternative standards that identifies the two major options for the transport layer for mainstream IP-based deployments.
|
Data Profile: US: SAE J3067 (J2735 SE)
Standards in Profile:
Level | Doc # | Standard | Description |
Facilities
|
SAE J2945
|
SAE J2945/0 DSRC Common Design Elements
|
This standard defines cross-cutting material which applies to the J2945/x series including generic DSRC interface requirements and guidance on Systems Engineering (SE) content.
|
ITS Application Entity
|
SAE J3067
|
SAE J3067 DSRC Prop Mods to 2735
|
This informational report formalized a deliverable received from the USDOT as suggested improvements to SAE J2735:2009. Many of these suggestions have been incorporated into later revisions of SAE J2735 and SAE J2945/x; additional suggestions may be incorporated as the documents are extended to address additional applications.
|
Readiness Description:
Multiple significant and minor issues. For existing deployments, the chosen solution is likely deficient in security or management capabilities, and the issues should be reviewed and upgrades developed as needed. Some solutions in this category may also be becoming obsolete from an interoperability perspective and if this is the case, then upgrades should be planned as soon as possible. For new deployments, the solution may be viable for pilots when applied to the triples it supports; such pilot deployments should consider a path to addressing these issues as a part of their design activities. The solution does not provide sufficient interoperability, management, and security to enable proper, full-scale deployment without additional work.
Last Updated 5/25/2023