US: SAE Other J2735 - WAVE TCP
Description:
This solution is used within the U.S.. It combines standards associated with US: SAE Other J2735 with those for V-X: WAVE TCP. The US: SAE Other J2735 standards include upper-layer standards required to implement V2X information flows that do not yet have fully specified functionality and performance charcateristics. The V-X: WAVE TCP standards include lower-layer standards that support connection-oriented vehicle-to-any communications within ~300m using the Transmission Control Protocol (TCP) over Internet Protocol version 6 (IPv6) over IEEE WAVE in the 5.9GHz spectrum.
Comm Profile: V-X: WAVE TCP
Standards in Profile:
Level | Doc # | Standard | Description |
Access
|
|
Bundle: WAVE - Subnet
|
A bundle of standards specifying the lower layers of the reference communications model for the US DSRC environment.
|
Security
|
|
Bundle: IEEE 1609.2
|
A bundle of standards that groups a set of IEEE security standards together for easy reference.
|
TransNet
|
|
Bundle: IPv6 for WAVE
|
A bundle of standards that identifies the RFCs that define how to use IPv6 over a WAVE (DSRC) environment. This group of standards is identified as a part of IEEE 1609.3.
|
TransNet
|
IEEE 1609.3
|
IEEE 1609.3 WAVE - Networking Services
|
This standard defines the network and transport layer options for the WAVE environment. The standard defines three options: a bandwidth efficient single-hop solution known as WSMP, UDP/IP, and TCP/IP. It has been harmonized with ISO FNTP and FSAP - a common message format specified in ISO 16460.
|
TransNet
|
IETF RFC 793
|
IETF RFC 793 TCP
|
This standard (RFC) defines the main connection-oriented Transport Layer protocol used on Internet-based networks.
|
Data Profile: US: SAE Other J2735
Standards in Profile:
Level | Doc # | Standard | Description |
Facilities
|
SAE J2735
|
SAE J2735 DSRC Message Set
|
This standard defines the data and messages for use in DSRC (i.e., V2V, V2I, and V2D) applications. The SAE J2945 series defines additional requirements on how to use these messages.
|
ITS Application Entity
|
SAE J2735
|
SAE J2735 DSRC Message Set
|
This standard defines the data and messages for use in DSRC (i.e., V2V, V2I, and V2D) applications. The SAE J2945 series defines additional requirements on how to use these messages.
|
Readiness Description:
Multiple significant and minor issues. For existing deployments, the chosen solution is likely deficient in security or management capabilities, and the issues should be reviewed and upgrades developed as needed. Some solutions in this category may also be becoming obsolete from an interoperability perspective and if this is the case, then upgrades should be planned as soon as possible. For new deployments, the solution may be viable for pilots when applied to the triples it supports; such pilot deployments should consider a path to addressing these issues as a part of their design activities. The solution does not provide sufficient interoperability, management, and security to enable proper, full-scale deployment without additional work.
Last Updated 5/25/2023